wuggy/Dactyloidae
wuggy/Dactyloidae
1
0
Fork 0
mirror of https://repo.dactyloidae.xyz/Dactyloidae/UXP.git synced 2026-09-10 10:18:38 +09:00
Code Issues Projects Releases Packages Wiki Activity
Dactyloidae/ldap/c-sdk/liblber/io.c

1757 lines
45 KiB
C
Raw Permalink Blame History

/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Mozilla Communicator client code, released
* March 31, 1998.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998-1999
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either of the GNU General Public License Version 2 or later (the "GPL"),
* or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/*
* Copyright (c) 1990 Regents of the University of Michigan.
* All rights reserved.
*
* Redistribution and use in source and binary forms are permitted
* provided that this notice is preserved and that due credit is given
* to the University of Michigan at Ann Arbor. The name of the University
* may not be used to endorse or promote products derived from this
* software without specific prior written permission. This software
* is provided ``as is'' without express or implied warranty.
*/
/* io.c - ber general i/o routines */
#include "lber-int.h"
#define bergetc( sb, len ) ( sb->sb_ber.ber_end > sb->sb_ber.ber_ptr ? \
(unsigned char)*sb->sb_ber.ber_ptr++ : \
ber_filbuf( sb, len ))
# ifdef macintosh
/*
* MacTCP/OpenTransport
*/
# define read( s, b, l ) tcpread( s, 0, (unsigned char *)b, l, NULL )
# define MAX_WRITE 65535
# define BerWrite( sb, b, l ) tcpwrite( sb->sb_sd, (unsigned char *)(b), (l<MAX_WRITE)? l : MAX_WRITE )
# else /* macintosh */
# if defined(_WIN32) || defined(_WINDOWS) || defined(XP_OS2)
/*
* 32-bit Windows Socket API (under Windows NT or Windows 95)
*/
# define read( s, b, l ) recv( s, b, l, 0 )
# define BerWrite( s, b, l ) send( s->sb_sd, b, l, 0 )
# else /* _WIN32 */
/*
* everything else (Unix/BSD 4.3 socket API)
*/
# define BerWrite( sb, b, l ) write( sb->sb_sd, b, l )
# define udp_read( sb, b, l, al ) recvfrom(sb->sb_sd, (char *)b, l, 0, \
(struct sockaddr *)sb->sb_fromaddr, \
(al = sizeof(struct sockaddr), &al))
# define udp_write( sb, b, l ) sendto(sb->sb_sd, (char *)(b), l, 0, \
(struct sockaddr *)sb->sb_useaddr, sizeof(struct sockaddr))
# endif /* _WIN32 */
# endif /* macintosh */
#ifndef udp_read
#define udp_read( sb, b, l, al ) CLDAP NOT SUPPORTED
#define udp_write( sb, b, l ) CLDAP NOT SUPPORTED
#endif /* udp_read */
#define EXBUFSIZ 1024
size_t lber_bufsize = EXBUFSIZ;
#ifdef LDAP_DEBUG
int lber_debug;
#endif
/*
* function prototypes
*/
static void nslberi_install_compat_io_fns( Sockbuf *sb );
static int nslberi_extread_compat( int s, void *buf, int len,
struct lextiof_socket_private *arg );
static int nslberi_extwrite_compat( int s, const void *buf, int len,
struct lextiof_socket_private *arg );
static ber_tag_t get_tag( Sockbuf *sb, BerElement *ber);
static ber_len_t get_ber_len( BerElement *ber);
static ber_len_t read_len_in_ber( Sockbuf *sb, BerElement *ber);
/*
* internal global structure for memory allocation callback functions
*/
static struct lber_memalloc_fns nslberi_memalloc_fns;
/*
* buffered read from "sb".
* returns value of first character read on success and -1 on error.
*/
static int
ber_filbuf( Sockbuf *sb, ber_slen_t len )
{
ssize_t rc;
#ifdef CLDAP
int addrlen;
#endif /* CLDAP */
if ( sb->sb_ber.ber_buf == NULL ) {
if ( (sb->sb_ber.ber_buf = (char *)NSLBERI_MALLOC(
READBUFSIZ )) == NULL ) {
return( -1 );
}
sb->sb_ber.ber_flags &= ~LBER_FLAG_NO_FREE_BUFFER;
sb->sb_ber.ber_ptr = sb->sb_ber.ber_buf;
sb->sb_ber.ber_end = sb->sb_ber.ber_buf;
}
if ( sb->sb_naddr > 0 ) {
#ifdef CLDAP
rc = udp_read(sb, sb->sb_ber.ber_buf, READBUFSIZ, addrlen );
#ifdef LDAP_DEBUG
if ( lber_debug ) {
char msg[80];
sprintf( msg, "ber_filbuf udp_read %d bytes\n",
rc );
ber_err_print( msg );
if ( lber_debug > 1 && rc > 0 )
lber_bprint( sb->sb_ber.ber_buf, rc );
}
#endif /* LDAP_DEBUG */
#else /* CLDAP */
rc = -1;
#endif /* CLDAP */
} else {
if ( sb->sb_ext_io_fns.lbextiofn_read != NULL ) {
rc = sb->sb_ext_io_fns.lbextiofn_read(
sb->sb_sd, sb->sb_ber.ber_buf,
((sb->sb_options & LBER_SOCKBUF_OPT_NO_READ_AHEAD)
&& (len < READBUFSIZ)) ? len : READBUFSIZ,
sb->sb_ext_io_fns.lbextiofn_socket_arg );
} else {
#ifdef NSLDAPI_AVOID_OS_SOCKETS
return( -1 );
#else
rc = read( sb->sb_sd, sb->sb_ber.ber_buf,
((sb->sb_options & LBER_SOCKBUF_OPT_NO_READ_AHEAD)
&& (len < READBUFSIZ)) ? len : READBUFSIZ );
#endif
}
}
if ( rc > 0 ) {
sb->sb_ber.ber_ptr = sb->sb_ber.ber_buf + 1;
sb->sb_ber.ber_end = sb->sb_ber.ber_buf + rc;
return( (unsigned char)*sb->sb_ber.ber_buf );
}
return( -1 );
}
static ber_int_t
BerRead( Sockbuf *sb, char *buf, ber_slen_t len )
{
int c;
ber_int_t nread = 0;
while (len > 0)
{
ber_int_t inberbuf = sb->sb_ber.ber_end - sb->sb_ber.ber_ptr;
if (inberbuf > 0)
{
size_t tocopy = len > inberbuf ? inberbuf : len;
SAFEMEMCPY(buf, sb->sb_ber.ber_ptr, tocopy);
buf += tocopy;
sb->sb_ber.ber_ptr += tocopy;
nread += tocopy;
len -= tocopy;
}
else
{
c = ber_filbuf(sb, len);
if (c < 0)
{
if (nread > 0)
break;
else
return c;
}
*buf++ = c;
nread++;
len--;
}
}
return (nread);
}
/*
* Note: ber_read() only uses the ber_end and ber_ptr elements of ber.
* Functions like ber_get_tag(), ber_skip_tag, and ber_peek_tag() rely on
* that fact, so if this code is changed to use any additional elements of
* the ber structure, those functions will need to be changed as well.
*/
ber_int_t
LDAP_CALL
ber_read( BerElement *ber, char *buf, ber_len_t len )
{
ber_len_t actuallen;
ber_uint_t nleft;
nleft = ber->ber_end - ber->ber_ptr;
actuallen = nleft < len ? nleft : len;
SAFEMEMCPY( buf, ber->ber_ptr, (size_t)actuallen );
ber->ber_ptr += actuallen;
return( (ber_int_t)actuallen );
}
/*
* enlarge the ber buffer.
* return 0 on success, -1 on error.
*/
int
nslberi_ber_realloc( BerElement *ber, ber_len_t len )
{
ber_uint_t need, have, total;
size_t have_bytes;
Seqorset *s;
ber_int_t off;
char *oldbuf;
int freeoldbuf = 0;
ber->ber_buf_reallocs++;
have_bytes = ber->ber_end - ber->ber_buf;
have = have_bytes / lber_bufsize;
need = (len < lber_bufsize ? 1 : (len + (lber_bufsize - 1)) / lber_bufsize);
total = have * lber_bufsize + need * lber_bufsize * ber->ber_buf_reallocs;
oldbuf = ber->ber_buf;
if (ber->ber_buf == NULL) {
if ( (ber->ber_buf = (char *)NSLBERI_MALLOC( (size_t)total ))
== NULL ) {
return( -1 );
}
ber->ber_flags &= ~LBER_FLAG_NO_FREE_BUFFER;
} else {
if ( !(ber->ber_flags & LBER_FLAG_NO_FREE_BUFFER) ) {
freeoldbuf = 1;
}
/* transition to malloc'd buffer */
if ( (ber->ber_buf = (char *)NSLBERI_MALLOC(
(size_t)total )) == NULL ) {
return( -1 );
}
ber->ber_flags &= ~LBER_FLAG_NO_FREE_BUFFER;
/* copy existing data into new malloc'd buffer */
SAFEMEMCPY( ber->ber_buf, oldbuf, have_bytes );
}
ber->ber_end = ber->ber_buf + total;
/*
* If the stinking thing was moved, we need to go through and
* reset all the sos and ber pointers. Offsets would've been
* a better idea... oh well.
*/
if ( ber->ber_buf != oldbuf ) {
ber->ber_ptr = ber->ber_buf + (ber->ber_ptr - oldbuf);
for ( s = ber->ber_sos; s != NULLSEQORSET; s = s->sos_next ) {
off = s->sos_first - oldbuf;
s->sos_first = ber->ber_buf + off;
off = s->sos_ptr - oldbuf;
s->sos_ptr = ber->ber_buf + off;
}
if ( freeoldbuf && oldbuf ) {
NSLBERI_FREE( oldbuf );
}
}
return( 0 );
}
/*
* returns "len" on success and -1 on failure.
*/
ber_int_t
LDAP_CALL
ber_write( BerElement *ber, char *buf, ber_len_t len, int nosos )
{
if ( nosos || ber->ber_sos == NULL ) {
if ( ber->ber_ptr + len > ber->ber_end ) {
if ( nslberi_ber_realloc( ber, len ) != 0 )
return( -1 );
}
SAFEMEMCPY( ber->ber_ptr, buf, (size_t)len );
ber->ber_ptr += len;
return( len );
} else {
if ( ber->ber_sos->sos_ptr + len > ber->ber_end ) {
if ( nslberi_ber_realloc( ber, len ) != 0 )
return( -1 );
}
SAFEMEMCPY( ber->ber_sos->sos_ptr, buf, (size_t)len );
ber->ber_sos->sos_ptr += len;
ber->ber_sos->sos_clen += len;
return( len );
}
}
void
LDAP_CALL
ber_free( BerElement *ber, int freebuf )
{
if ( ber != NULL ) {
if ( freebuf &&
!(ber->ber_flags & LBER_FLAG_NO_FREE_BUFFER)) {
NSLBERI_FREE(ber->ber_buf);
}
NSLBERI_FREE( (char *) ber );
}
}
/*
* return >= 0 on success, -1 on failure.
*/
int
LDAP_CALL
ber_flush( Sockbuf *sb, BerElement *ber, int freeit )
{
ssize_t nwritten = 0, towrite, rc;
int i = 0;
if (ber->ber_rwptr == NULL) {
ber->ber_rwptr = ber->ber_buf;
} else if (ber->ber_rwptr >= ber->ber_end) {
/* we will use the ber_rwptr to continue an exited flush,
so if rwptr is not within the buffer we return an error. */
return( -1 );
}
/* writev section - for iDAR only!!! */
if (sb->sb_ext_io_fns.lbextiofn_writev != NULL) {
/* add the sizes of the different buffers to write with writev */
for (towrite = 0, i = 0; i < BER_ARRAY_QUANTITY; ++i) {
/* don't add lengths of null buffers - writev will ignore them */
if (ber->ber_struct[i].ldapiov_base) {
towrite += ber->ber_struct[i].ldapiov_len;
}
}
rc = sb->sb_ext_io_fns.lbextiofn_writev(sb->sb_sd, ber->ber_struct, BER_ARRAY_QUANTITY,
sb->sb_ext_io_fns.lbextiofn_socket_arg);
if ( freeit )
ber_free( ber, 1 );
if (rc >= 0) {
/* return the number of bytes TO BE written */
return (towrite - rc);
} else {
/* otherwise it's an error */
return (rc);
}
} /* end writev section */
towrite = ber->ber_ptr - ber->ber_rwptr;
#ifdef LDAP_DEBUG
if ( lber_debug ) {
char msg[80];
sprintf( msg, "ber_flush: %d bytes to sd %ld%s\n", (int)towrite,
sb->sb_sd, ber->ber_rwptr != ber->ber_buf ? " (re-flush)"
: "" );
ber_err_print( msg );
if ( lber_debug > 1 )
lber_bprint( ber->ber_rwptr, towrite );
}
#endif
#if !defined(macintosh) && !defined(DOS)
if ( sb->sb_options & (LBER_SOCKBUF_OPT_TO_FILE | LBER_SOCKBUF_OPT_TO_FILE_ONLY) ) {
rc = write( sb->sb_copyfd, ber->ber_buf, towrite );
if ( sb->sb_options & LBER_SOCKBUF_OPT_TO_FILE_ONLY ) {
return( (int)rc );
}
}
#endif
nwritten = 0;
do {
if (sb->sb_naddr > 0) {
#ifdef CLDAP
rc = udp_write( sb, ber->ber_buf + nwritten,
(size_t)towrite );
#else /* CLDAP */
rc = -1;
#endif /* CLDAP */
if ( rc <= 0 )
return( -1 );
/* fake error if write was not atomic */
if (rc < towrite) {
#if !defined( macintosh ) && !defined( DOS )
errno = EMSGSIZE; /* For Win32, see portable.h */
#endif
return( -1 );
}
} else {
if ( sb->sb_ext_io_fns.lbextiofn_write != NULL ) {
if ( (rc = sb->sb_ext_io_fns.lbextiofn_write(
sb->sb_sd, ber->ber_rwptr, (size_t)towrite,
sb->sb_ext_io_fns.lbextiofn_socket_arg ))
<= 0 ) {
return( -1 );
}
} else {
#ifdef NSLDAPI_AVOID_OS_SOCKETS
return( -1 );
#else
if ( (rc = BerWrite( sb, ber->ber_rwptr,
(size_t) towrite )) <= 0 ) {
return( -1 );
}
#endif
}
}
towrite -= rc;
nwritten += rc;
ber->ber_rwptr += rc;
} while ( towrite > 0 );
if ( freeit )
ber_free( ber, 1 );
return( 0 );
}
/* we pre-allocate a buffer to save the extra malloc later */
BerElement *
LDAP_CALL
ber_alloc_t( int options )
{
BerElement *ber;
if ( (ber = (BerElement*)NSLBERI_CALLOC( 1,
sizeof(struct berelement) + lber_bufsize )) == NULL ) {
return( NULL );
}
/*
* for compatibility with the C LDAP API standard, we recognize
* LBER_USE_DER as LBER_OPT_USE_DER. See lber.h for a bit more info.
*/
if ( options & LBER_USE_DER ) {
options &= ~LBER_USE_DER;
options |= LBER_OPT_USE_DER;
}
ber->ber_tag = LBER_DEFAULT;
ber->ber_options = options;
ber->ber_buf = (char*)ber + sizeof(struct berelement);
ber->ber_ptr = ber->ber_buf;
ber->ber_end = ber->ber_buf + lber_bufsize;
ber->ber_flags = LBER_FLAG_NO_FREE_BUFFER;
return( ber );
}
BerElement *
LDAP_CALL
ber_alloc()
{
return( ber_alloc_t( 0 ) );
}
BerElement *
LDAP_CALL
der_alloc()
{
return( ber_alloc_t( LBER_OPT_USE_DER ) );
}
BerElement *
LDAP_CALL
ber_dup( BerElement *ber )
{
BerElement *new;
if ( (new = ber_alloc()) == NULL )
return( NULL );
*new = *ber;
return( new );
}
void
LDAP_CALL
ber_init_w_nullchar( BerElement *ber, int options )
{
(void) memset( (char *)ber, '\0', sizeof(struct berelement) );
ber->ber_tag = LBER_DEFAULT;
/*
* For compatibility with the C LDAP API standard, we recognize
* LBER_USE_DER as LBER_OPT_USE_DER. See lber.h for a bit more info.
*/
if ( options & LBER_USE_DER ) {
options &= ~LBER_USE_DER;
options |= LBER_OPT_USE_DER;
}
ber->ber_options = options;
}
void
LDAP_CALL
ber_reset( BerElement *ber, int was_writing )
{
if ( was_writing ) {
ber->ber_end = ber->ber_ptr;
ber->ber_ptr = ber->ber_buf;
} else {
ber->ber_ptr = ber->ber_end;
}
ber->ber_rwptr = NULL;
ber->ber_tag_len_read = 0;
memset(ber->ber_struct, 0, BER_CONTENTS_STRUCT_SIZE);
}
/* Returns the length of the ber buffer so far,
taking into account sequences/sets also.
CAUTION: Returns 0 on null buffers as well
as 0 on empty buffers!
*/
size_t
LDAP_CALL
ber_get_buf_datalen( BerElement *ber )
{
size_t datalen;
if ( ( ber == NULL) || ( ber->ber_buf == NULL) || ( ber->ber_ptr == NULL ) ) {
datalen = 0;
} else if (ber->ber_sos == NULLSEQORSET) {
/* there are no sequences or sets yet,
so just subtract ptr from the beginning of the ber buffer */
datalen = ber->ber_ptr - ber->ber_buf;
} else {
/* sequences exist, so just take the ptr of the sequence
on top of the stack and subtract the beginning of the
buffer from it */
datalen = ber->ber_sos->sos_ptr - ber->ber_buf;
}
return datalen;
}
/*
if buf is 0 then malloc a buffer of length size
returns > 0 on success, 0 otherwise
*/
int
LDAP_CALL
ber_stack_init(BerElement *ber, int options, char * buf,
size_t size)
{
if (NULL == ber)
return 0;
memset(ber, 0, sizeof(*ber));
/*
* for compatibility with the C LDAP API standard, we recognize
* LBER_USE_DER as LBER_OPT_USE_DER. See lber.h for a bit more info.
*/
if ( options & LBER_USE_DER ) {
options &= ~LBER_USE_DER;
options |= LBER_OPT_USE_DER;
}
ber->ber_tag = LBER_DEFAULT;
ber->ber_options = options;
if ( ber->ber_buf && !(ber->ber_flags & LBER_FLAG_NO_FREE_BUFFER)) {
NSLBERI_FREE(ber->ber_buf);
}
if (buf) {
ber->ber_buf = ber->ber_ptr = buf;
ber->ber_flags = LBER_FLAG_NO_FREE_BUFFER;
} else {
ber->ber_buf = ber->ber_ptr = (char *) NSLBERI_MALLOC(size);
}
ber->ber_end = ber->ber_buf + size;
return ber->ber_buf != 0;
}
/*
* This call allows to release only the data part of
* the target Sockbuf.
* Other info of this Sockbuf are kept unchanged.
*/
void
LDAP_CALL
ber_sockbuf_free_data(Sockbuf *p)
{
if ( p != NULL ) {
if ( p->sb_ber.ber_buf != NULL &&
!(p->sb_ber.ber_flags & LBER_FLAG_NO_FREE_BUFFER) ) {
NSLBERI_FREE( p->sb_ber.ber_buf );
p->sb_ber.ber_buf = NULL;
}
}
}
/* simply returns ber_buf in the ber ...
explicitly for DS MMR only...
*/
char *
LDAP_CALL
ber_get_buf_databegin (BerElement * ber)
{
if (NULL != ber) {
return ber->ber_buf;
} else {
return NULL;
}
}
#ifdef LDAP_DEBUG
void
ber_dump( BerElement *ber, int inout )
{
char msg[128];
sprintf( msg, "ber_dump: buf 0x%p, ptr 0x%p, rwptr 0x%p, end 0x%p\n",
ber->ber_buf, ber->ber_ptr, ber->ber_rwptr, ber->ber_end );
ber_err_print( msg );
if ( inout == 1 ) {
sprintf( msg, " current len %ld, contents:\n",
(long)(ber->ber_end - ber->ber_ptr) );
ber_err_print( msg );
lber_bprint( ber->ber_ptr, ber->ber_end - ber->ber_ptr );
} else {
sprintf( msg, " current len %ld, contents:\n",
(long)(ber->ber_ptr - ber->ber_buf) );
ber_err_print( msg );
lber_bprint( ber->ber_buf, ber->ber_ptr - ber->ber_buf );
}
}
void
ber_sos_dump( Seqorset *sos )
{
char msg[80];
ber_err_print ( "*** sos dump ***\n" );
while ( sos != NULLSEQORSET ) {
sprintf( msg, "ber_sos_dump: clen %d first 0x%p ptr 0x%p\n",
sos->sos_clen, sos->sos_first, sos->sos_ptr );
ber_err_print( msg );
sprintf( msg, " current len %ld contents:\n",
(long)(sos->sos_ptr - sos->sos_first) );
ber_err_print( msg );
lber_bprint( sos->sos_first, sos->sos_ptr - sos->sos_first );
sos = sos->sos_next;
}
ber_err_print( "*** end dump ***\n" );
}
#endif
/* return the tag - LBER_DEFAULT returned means trouble
* assumes the tag is only one byte! */
static ber_tag_t
get_tag( Sockbuf *sb, BerElement *ber)
{
unsigned char xbyte;
if ( (BerRead( sb, (char *) &xbyte, 1 )) != 1 ) {
return( LBER_DEFAULT );
}
/* we only handle small (one byte) tags */
if ( (xbyte & LBER_BIG_TAG_MASK) == LBER_BIG_TAG_MASK ) {
return( LBER_DEFAULT );
}
ber->ber_tag_contents[0] = xbyte;
ber->ber_struct[BER_STRUCT_TAG].ldapiov_len = 1;
return((ber_tag_t)xbyte);
}
/* Error checking? */
/* Takes a ber and returns the actual length */
static ber_len_t
get_ber_len( BerElement *ber)
{
int noctets;
ber_len_t len = 0;
char xbyte;
xbyte = ber->ber_len_contents[0];
/* long form */
if (xbyte & 0x80) {
noctets = (int) (xbyte & 0x7f);
if (noctets >= MAX_LEN_SIZE) {
return(LBER_DEFAULT);
}
SAFEMEMCPY((char*) &len + sizeof(ber_len_t) - noctets, &ber->ber_len_contents[1], noctets);
len = LBER_NTOHL(len);
return(len);
} else {
return((ber_len_t)(xbyte));
}
}
/* LBER_DEFAULT means trouble
reads in the length, stores it in ber->ber_struct, and returns get_ber_len */
static ber_len_t
read_len_in_ber( Sockbuf *sb, BerElement *ber)
{
unsigned char xbyte;
int noctets;
int rc = 0, read_result = 0;
/*
* Next, read the length. The first byte contains the length
* of the length. If bit 8 is set, the length is the long
* form, otherwise it's the short form. We don't allow a
* length that's greater than what we can hold in a ber_int_t
*/
if ( ber->ber_tag_len_read == 1) {
/* the length of the length hasn't been read yet */
if ( BerRead( sb, (char *) &xbyte, 1 ) != 1 ) {
return( LBER_DEFAULT );
}
ber->ber_tag_len_read = 2;
ber->ber_len_contents[0] = xbyte;
} else {
rc = ber->ber_tag_len_read - 2;
xbyte = ber->ber_len_contents[0];
}
/* long form of the length value */
if ( xbyte & 0x80 ) {
noctets = (xbyte & 0x7f);
if ( noctets >= MAX_LEN_SIZE )
return( LBER_DEFAULT );
while (rc < noctets) {
read_result = BerRead( sb, &(ber->ber_len_contents[1]) + rc, noctets - rc );
if (read_result <= 0) {
ber->ber_tag_len_read = rc + 2; /* so we can continue later - include tag and lenlen */
return( LBER_DEFAULT );
}
rc += read_result;
}
ber->ber_tag_len_read = rc + 2; /* adds tag (1 byte) and lenlen (1 byte) */
ber->ber_struct[BER_STRUCT_LEN].ldapiov_len = 1 + noctets;
} else { /* short form of the length value */
ber->ber_struct[BER_STRUCT_LEN].ldapiov_len = 1;
}
return(get_ber_len(ber));
}
ber_tag_t
LDAP_CALL
ber_get_next( Sockbuf *sb, ber_len_t *len, BerElement *ber )
{
ber_len_t newlen;
ber_len_t toread;
ber_int_t rc;
ber_len_t orig_taglen_read = 0;
char * orig_rwptr = ber->ber_rwptr ? ber->ber_rwptr : ber->ber_buf;
#ifdef LDAP_DEBUG
if ( lber_debug )
ber_err_print( "ber_get_next\n" );
#endif
/*
* When rwptr is NULL this signifies that the tag and length have not been
* read in their entirety yet. (if at all)
*/
if ( ber->ber_rwptr == NULL ) {
/* first save the amount we previously read, so we know what to return in len. */
orig_taglen_read = ber->ber_tag_len_read;
/* read the tag - if tag_len_read is greater than 0, then it has already been read. */
if (ber->ber_tag_len_read == 0) {
if ((ber->ber_tag = get_tag(sb, ber)) == LBER_DEFAULT ) {
*len = 0;
return( LBER_DEFAULT );
}
ber->ber_tag_contents[0] = (char)ber->ber_tag; /* we only handle 1 byte tags */
ber->ber_tag_len_read = 1;
/* check for validity */
if((sb->sb_options & LBER_SOCKBUF_OPT_VALID_TAG) &&
(ber->ber_tag != sb->sb_valid_tag)) {
*len = 1; /* we just read the tag so far */
return( LBER_DEFAULT);
}
}
/* read the length */
if ((newlen = read_len_in_ber(sb, ber)) == LBER_DEFAULT ) {
*len = ber->ber_tag_len_read - orig_taglen_read;
return( LBER_DEFAULT );
}
/*
* Finally, malloc a buffer for the contents and read it in.
* It's this buffer that's passed to all the other ber decoding
* routines.
*/
#if defined( DOS ) && !( defined( _WIN32 ) || defined(XP_OS2) )
if ( newlen > 65535 ) { /* DOS can't allocate > 64K */
return( LBER_DEFAULT );
}
#endif /* DOS && !_WIN32 */
if ( ( sb->sb_options & LBER_SOCKBUF_OPT_MAX_INCOMING_SIZE )
&& newlen > sb->sb_max_incoming ) {
return( LBER_DEFAULT );
}
/* check to see if we already have enough memory allocated */
if ( ((ber_len_t) ber->ber_end - (ber_len_t) ber->ber_buf) < newlen) {
if ( ber->ber_buf && !(ber->ber_flags & LBER_FLAG_NO_FREE_BUFFER)) {
NSLBERI_FREE(ber->ber_buf);
}
if ( (ber->ber_buf = (char *)NSLBERI_CALLOC( 1,(size_t)newlen ))
== NULL ) {
return( LBER_DEFAULT );
}
ber->ber_flags &= ~LBER_FLAG_NO_FREE_BUFFER;
orig_rwptr = ber->ber_buf;
}
ber->ber_len = newlen;
ber->ber_ptr = ber->ber_buf;
ber->ber_end = ber->ber_buf + newlen;
ber->ber_rwptr = ber->ber_buf;
ber->ber_tag_len_read = 0; /* now that rwptr is set, this doesn't matter */
}
/* OK, we've malloc-ed the buffer; now read the rest of the expected length */
toread = (ber_len_t)ber->ber_end - (ber_len_t)ber->ber_rwptr;
do {
if ( (rc = BerRead( sb, ber->ber_rwptr, (ber_int_t)toread )) <= 0 ) {
*len = (ber_len_t) ber->ber_rwptr - (ber_len_t) orig_rwptr;
return( LBER_DEFAULT );
}
toread -= rc;
ber->ber_rwptr += rc;
} while ( toread > 0 );
#ifdef LDAP_DEBUG
if ( lber_debug ) {
char msg[80];
sprintf( msg, "ber_get_next: tag 0x%x len %d contents:\n",
ber->ber_tag, ber->ber_len );
ber_err_print( msg );
if ( lber_debug > 1 )
ber_dump( ber, 1 );
}
#endif
*len = (ber_len_t) ber->ber_rwptr - (ber_len_t) orig_rwptr;
ber->ber_rwptr = NULL;
ber->ber_struct[BER_STRUCT_VAL].ldapiov_len = ber->ber_len;
return( ber->ber_tag );
}
Sockbuf *
LDAP_CALL
ber_sockbuf_alloc()
{
return( (Sockbuf *)NSLBERI_CALLOC( 1, sizeof(struct sockbuf) ) );
}
void
LDAP_CALL
ber_sockbuf_free(Sockbuf *p)
{
if ( p != NULL ) {
if ( p->sb_ber.ber_buf != NULL &&
!(p->sb_ber.ber_flags & LBER_FLAG_NO_FREE_BUFFER) ) {
NSLBERI_FREE( p->sb_ber.ber_buf );
}
NSLBERI_FREE(p);
}
}
/*
* return 0 on success and -1 on error
*/
int
LDAP_CALL
ber_set_option( struct berelement *ber, int option, void *value )
{
/*
* memory allocation callbacks are global, so it is OK to pass
* NULL for ber. Handle this as a special case.
*/
if ( option == LBER_OPT_MEMALLOC_FN_PTRS ) {
/* struct copy */
nslberi_memalloc_fns = *((struct lber_memalloc_fns *)value);
return( 0 );
}
/*
* lber_debug is global, so it is OK to pass
* NULL for ber. Handle this as a special case.
*/
if ( option == LBER_OPT_DEBUG_LEVEL ) {
#ifdef LDAP_DEBUG
lber_debug = *(int *)value;
#endif
return( 0 );
}
/*
* lber_bufsize is global, so it is OK to pass
* NULL for ber. Handle this as a special case.
*/
if ( option == LBER_OPT_BUFSIZE ) {
if ( *(size_t *)value > EXBUFSIZ ) {
lber_bufsize = *(size_t *)value;
}
return( 0 );
}
/*
* all the rest require a non-NULL ber
*/
if ( !NSLBERI_VALID_BERELEMENT_POINTER( ber )) {
return( -1 );
}
switch ( option ) {
case LBER_OPT_USE_DER:
case LBER_OPT_TRANSLATE_STRINGS:
if ( value != NULL ) {
ber->ber_options |= option;
} else {
ber->ber_options &= ~option;
}
break;
case LBER_OPT_REMAINING_BYTES:
ber->ber_end = ber->ber_ptr + *((ber_len_t *)value);
break;
case LBER_OPT_TOTAL_BYTES:
ber->ber_end = ber->ber_buf + *((ber_len_t *)value);
break;
case LBER_OPT_BYTES_TO_WRITE:
ber->ber_ptr = ber->ber_buf + *((ber_len_t *)value);
break;
default:
return( -1 );
}
return( 0 );
}
/*
* return 0 on success and -1 on error
*/
int
LDAP_CALL
ber_get_option( struct berelement *ber, int option, void *value )
{
/*
* memory callocation callbacks are global, so it is OK to pass
* NULL for ber. Handle this as a special case
*/
if ( option == LBER_OPT_MEMALLOC_FN_PTRS ) {
/* struct copy */
*((struct lber_memalloc_fns *)value) = nslberi_memalloc_fns;
return( 0 );
}
/*
* lber_debug is global, so it is OK to pass
* NULL for ber. Handle this as a special case.
*/
if ( option == LBER_OPT_DEBUG_LEVEL ) {
#ifdef LDAP_DEBUG
*(int *)value = lber_debug;
#endif
return( 0 );
}
/*
* lber_bufsize is global, so it is OK to pass
* NULL for ber. Handle this as a special case.
*/
if ( option == LBER_OPT_BUFSIZE ) {
*(size_t *)value = lber_bufsize;
return( 0 );
}
/*
* all the rest require a non-NULL ber
*/
if ( !NSLBERI_VALID_BERELEMENT_POINTER( ber )) {
return( -1 );
}
switch ( option ) {
case LBER_OPT_USE_DER:
case LBER_OPT_TRANSLATE_STRINGS:
*((int *) value) = (ber->ber_options & option);
break;
case LBER_OPT_REMAINING_BYTES:
*((ber_len_t *) value) = ber->ber_end - ber->ber_ptr;
break;
case LBER_OPT_TOTAL_BYTES:
*((ber_len_t *) value) = ber->ber_end - ber->ber_buf;
break;
case LBER_OPT_BYTES_TO_WRITE:
*((ber_len_t *) value) = ber->ber_ptr - ber->ber_buf;
break;
default:
return( -1 );
}
return( 0 );
}
/*
* return 0 on success and -1 on error
*/
int
LDAP_CALL
ber_sockbuf_set_option( Sockbuf *sb, int option, void *value )
{
struct lber_x_ext_io_fns *extiofns;
if ( !NSLBERI_VALID_SOCKBUF_POINTER( sb )) {
return( -1 );
}
/* check for a NULL value for certain options. */
if (NULL == value) {
switch ( option ) {
case LBER_SOCKBUF_OPT_TO_FILE:
case LBER_SOCKBUF_OPT_TO_FILE_ONLY:
case LBER_SOCKBUF_OPT_NO_READ_AHEAD:
case LBER_SOCKBUF_OPT_READ_FN:
case LBER_SOCKBUF_OPT_WRITE_FN:
case LBER_SOCKBUF_OPT_EXT_IO_FNS:
case LBER_SOCKBUF_OPT_MAX_INCOMING_SIZE:
/* do nothing - it's OK to have a NULL value for these options */
break;
default:
return( -1 );
}
}
switch ( option ) {
case LBER_SOCKBUF_OPT_VALID_TAG:
sb->sb_valid_tag= *((ber_tag_t *) value);
/* use NULL to reset */
if ( value != NULL ) {
sb->sb_options |= option;
} else {
sb->sb_options &= ~option;
}
break;
case LBER_SOCKBUF_OPT_MAX_INCOMING_SIZE:
if ( value != NULL ) {
sb->sb_max_incoming = *((ber_len_t *) value);
sb->sb_options |= option;
} else {
/* setting the max incoming to 0 seems to be the only
way to tell the callers of ber_sockbuf_get_option
that this option isn't set. */
sb->sb_max_incoming = 0;
sb->sb_options &= ~option;
}
break;
case LBER_SOCKBUF_OPT_TO_FILE:
case LBER_SOCKBUF_OPT_TO_FILE_ONLY:
case LBER_SOCKBUF_OPT_NO_READ_AHEAD:
if ( value != NULL ) {
sb->sb_options |= option;
} else {
sb->sb_options &= ~option;
}
break;
case LBER_SOCKBUF_OPT_DESC:
sb->sb_sd = *((LBER_SOCKET *) value);
break;
case LBER_SOCKBUF_OPT_COPYDESC:
sb->sb_copyfd = *((LBER_SOCKET *) value);
break;
case LBER_SOCKBUF_OPT_READ_FN:
sb->sb_io_fns.lbiof_read = (LDAP_IOF_READ_CALLBACK *) value;
nslberi_install_compat_io_fns( sb );
break;
case LBER_SOCKBUF_OPT_WRITE_FN:
sb->sb_io_fns.lbiof_write = (LDAP_IOF_WRITE_CALLBACK *) value;
nslberi_install_compat_io_fns( sb );
break;
case LBER_SOCKBUF_OPT_EXT_IO_FNS:
extiofns = (struct lber_x_ext_io_fns *) value;
if ( extiofns == NULL ) { /* remove */
(void)memset( (char *)&sb->sb_ext_io_fns, '\0',
sizeof(sb->sb_ext_io_fns ));
} else if ( extiofns->lbextiofn_size
== LBER_X_EXTIO_FNS_SIZE ) {
/* struct copy */
sb->sb_ext_io_fns = *extiofns;
} else if ( extiofns->lbextiofn_size
== LBER_X_EXTIO_FNS_SIZE_REV0 ) {
/* backwards compatiblity for older struct */
sb->sb_ext_io_fns.lbextiofn_size =
LBER_X_EXTIO_FNS_SIZE;
sb->sb_ext_io_fns.lbextiofn_read =
extiofns->lbextiofn_read;
sb->sb_ext_io_fns.lbextiofn_write =
extiofns->lbextiofn_write;
sb->sb_ext_io_fns.lbextiofn_writev = NULL;
sb->sb_ext_io_fns.lbextiofn_socket_arg =
extiofns->lbextiofn_socket_arg;
} else {
return( -1 );
}
break;
case LBER_SOCKBUF_OPT_SOCK_ARG:
sb->sb_ext_io_fns.lbextiofn_socket_arg =
(struct lextiof_socket_private *) value;
break;
default:
return( -1 );
}
return( 0 );
}
/*
* return 0 on success and -1 on error
*/
int
LDAP_CALL
ber_sockbuf_get_option( Sockbuf *sb, int option, void *value )
{
struct lber_x_ext_io_fns *extiofns;
if ( !NSLBERI_VALID_SOCKBUF_POINTER( sb ) || (NULL == value)) {
return( -1 );
}
switch ( option ) {
case LBER_SOCKBUF_OPT_VALID_TAG:
*((ber_tag_t *) value) = sb->sb_valid_tag;
break;
case LBER_SOCKBUF_OPT_MAX_INCOMING_SIZE:
*((ber_len_t *) value) = sb->sb_max_incoming;
break;
case LBER_SOCKBUF_OPT_TO_FILE:
case LBER_SOCKBUF_OPT_TO_FILE_ONLY:
case LBER_SOCKBUF_OPT_NO_READ_AHEAD:
*((int *) value) = (sb->sb_options & option);
break;
case LBER_SOCKBUF_OPT_DESC:
*((LBER_SOCKET *) value) = sb->sb_sd;
break;
case LBER_SOCKBUF_OPT_COPYDESC:
*((LBER_SOCKET *) value) = sb->sb_copyfd;
break;
case LBER_SOCKBUF_OPT_READ_FN:
*((LDAP_IOF_READ_CALLBACK **) value)
= sb->sb_io_fns.lbiof_read;
break;
case LBER_SOCKBUF_OPT_WRITE_FN:
*((LDAP_IOF_WRITE_CALLBACK **) value)
= sb->sb_io_fns.lbiof_write;
break;
case LBER_SOCKBUF_OPT_EXT_IO_FNS:
extiofns = (struct lber_x_ext_io_fns *) value;
if ( extiofns == NULL ) {
return( -1 );
} else if ( extiofns->lbextiofn_size
== LBER_X_EXTIO_FNS_SIZE ) {
/* struct copy */
*extiofns = sb->sb_ext_io_fns;
} else if ( extiofns->lbextiofn_size
== LBER_X_EXTIO_FNS_SIZE_REV0 ) {
/* backwards compatiblity for older struct */
extiofns->lbextiofn_read = sb->sb_ext_io_fns.lbextiofn_read;
extiofns->lbextiofn_write = sb->sb_ext_io_fns.lbextiofn_write;
extiofns->lbextiofn_socket_arg = sb->sb_ext_io_fns.lbextiofn_socket_arg;
} else {
return( -1 );
}
break;
case LBER_SOCKBUF_OPT_SOCK_ARG:
*((struct lextiof_socket_private **)value) = sb->sb_ext_io_fns.lbextiofn_socket_arg;
break;
default:
return( -1 );
}
return( 0 );
}
/* new dboreham code below: */
struct byte_buffer {
unsigned char *p;
int offset;
int length;
};
typedef struct byte_buffer byte_buffer;
/* This call allocates us a BerElement structure plus some extra memory.
* It returns a pointer to the BerElement, plus a pointer to the extra memory.
* This routine also allocates a ber data buffer within the same block, thus
* saving a call to calloc later when we read data.
*/
void*
LDAP_CALL
ber_special_alloc(size_t size, BerElement **ppBer)
{
char *mem = NULL;
/* Make sure mem size requested is aligned */
if (0 != ( size & 0x03 )) {
size += (sizeof(ber_int_t) - (size & 0x03));
}
mem = NSLBERI_MALLOC(sizeof(struct berelement) + lber_bufsize + size );
if (NULL == mem) {
return NULL;
}
*ppBer = (BerElement*) (mem + size);
memset(*ppBer,0,sizeof(struct berelement));
(*ppBer)->ber_tag = LBER_DEFAULT;
(*ppBer)->ber_buf = mem + size + sizeof(struct berelement);
(*ppBer)->ber_ptr = (*ppBer)->ber_buf;
(*ppBer)->ber_end = (*ppBer)->ber_buf + lber_bufsize;
(*ppBer)->ber_flags = LBER_FLAG_NO_FREE_BUFFER;
return (void*)mem;
}
void
LDAP_CALL
ber_special_free(void* buf, BerElement *ber)
{
if (!(ber->ber_flags & LBER_FLAG_NO_FREE_BUFFER)) {
NSLBERI_FREE(ber->ber_buf);
}
NSLBERI_FREE( buf );
}
/* Copy up to bytes_to_read bytes from b into return_buffer.
* Returns a count of bytes copied (always >= 0).
*/
static int
read_bytes(byte_buffer *b, unsigned char *return_buffer, int bytes_to_read)
{
/* copy up to bytes_to_read bytes into the caller's buffer, return the number of bytes copied */
int bytes_to_copy = 0;
if (bytes_to_read <= (b->length - b->offset) ) {
bytes_to_copy = bytes_to_read;
} else {
bytes_to_copy = (b->length - b->offset);
}
if (1 == bytes_to_copy) {
*return_buffer = *(b->p+b->offset++);
} else if (bytes_to_copy <= 0) {
bytes_to_copy = 0; /* never return a negative result */
} else {
SAFEMEMCPY(return_buffer,b->p+b->offset,bytes_to_copy);
b->offset += bytes_to_copy;
}
return bytes_to_copy;
}
/* return the tag - LBER_DEFAULT returned means trouble */
static ber_tag_t
get_buffer_tag(byte_buffer *sb )
{
unsigned char xbyte;
ber_tag_t tag;
char *tagp;
int i;
if ( (i = read_bytes( sb, &xbyte, 1 )) != 1 ) {
return( LBER_DEFAULT );
}
if ( (xbyte & LBER_BIG_TAG_MASK) != LBER_BIG_TAG_MASK ) {
return( (ber_uint_t) xbyte );
}
tagp = (char *) &tag;
tagp[0] = xbyte;
for ( i = 1; i < sizeof(ber_int_t); i++ ) {
if ( read_bytes( sb, &xbyte, 1 ) != 1 )
return( LBER_DEFAULT );
tagp[i] = xbyte;
if ( ! (xbyte & LBER_MORE_TAG_MASK) )
break;
}
/* tag too big! */
if ( i == sizeof(ber_int_t) )
return( LBER_DEFAULT );
/* want leading, not trailing 0's */
return( tag >> (sizeof(ber_int_t) - i - 1) );
}
/* Like ber_get_next, but from a byte buffer the caller already has. */
/* Bytes_Scanned returns the number of bytes we actually looked at in the buffer. */
/* ber_get_next_buffer is now implemented in terms of ber_get_next_buffer_ext */
/* and is here for backward compatibility. This new function allows us to pass */
/* the Sockbuf structure along */
ber_uint_t
LDAP_CALL
ber_get_next_buffer( void *buffer, size_t buffer_size, ber_len_t *len,
BerElement *ber, ber_uint_t *Bytes_Scanned )
{
return (ber_get_next_buffer_ext( buffer, buffer_size, len, ber,
Bytes_Scanned, NULL));
}
/*
* Returns the tag of the message or LBER_ return code if an error occurs.
*
* If there was not enough data in the buffer to complete the message this
* is a "soft" error. In this case, *Bytes_Scanned is set to a positive
* number and return code is set to LBER_DEFAULT.
*
* On overflow condition when the length is either bigger than ber_uint_t
* type or the value preset via LBER_SOCKBUF_OPT_MAX_INCOMING_SIZE option,
* *Bytes_Scanned is set to zero and return code is set to LBER_OVERFLOW.
*
* For backward compatibility errno is also set on these error conditions:
*
* EINVAL - LBER_SOCKBUF_OPT_VALID_TAG option set but tag doesnt match.
* EMSGSIZE - an overflow condition as described above for LBER_OVERFLOW.
*/
ber_uint_t
LDAP_CALL
ber_get_next_buffer_ext( void *buffer, size_t buffer_size, ber_len_t *len,
BerElement *ber, ber_uint_t *Bytes_Scanned, Sockbuf *sock )
{
ber_tag_t tag = 0;
ber_len_t netlen;
ber_len_t toread;
unsigned char lc;
ssize_t rc;
int noctets, diff;
byte_buffer sb = {0};
/*
* Any ber element looks like this: tag length contents.
* Assuming everything's ok, we return the tag byte (we
* can assume a single byte), return the length in len,
* and the rest of the undecoded element in buf.
*
* Assumptions:
* 1) small tags (less than 128)
* 2) definite lengths
* 3) primitive encodings used whenever possible
*/
/*
* first time through - malloc the buffer, set up ptrs, and
* read the tag and the length and as much of the rest as we can
*/
sb.p = buffer;
sb.length = buffer_size;
if ( ber->ber_rwptr == NULL ) {
/*
* First, we read the tag.
*/
/* if we have been called before with a fragment not
* containing a complete length, we have no rwptr but
* a tag already
*/
if ( ber->ber_tag == LBER_DEFAULT ) {
if ( (tag = get_buffer_tag( &sb )) == LBER_DEFAULT ) {
goto premature_exit;
}
ber->ber_tag = tag;
}
if((sock->sb_options & LBER_SOCKBUF_OPT_VALID_TAG) &&
(ber->ber_tag != sock->sb_valid_tag)) {
#if !defined( macintosh ) && !defined( DOS )
errno = EINVAL;
#endif
goto error_exit;
}
/* If we have been called before with an incomplete length,
* the fragment of the length read is in ber->ber_len_contents
* ber->ber_tag_len_read is the # of bytes of the length available
* from a previous fragment
*/
if (ber->ber_tag_len_read) {
int nbytes;
noctets = ((ber->ber_len_contents[0]) & 0x7f);
diff = noctets + 1 /* tag */ - ber->ber_tag_len_read;
if ( (nbytes = read_bytes( &sb, (unsigned char *) &ber->ber_len_contents[0] +
ber->ber_tag_len_read, diff )) != diff ) {
if (nbytes > 0)
ber->ber_tag_len_read+=nbytes;
goto premature_exit;
}
*len = get_ber_len(ber); /* cast ber->ber_len_contents to unsigned long */
} else {
/*
* Next, read the length. The first byte contains the length
* of the length. If bit 8 is set, the length is the long
* form, otherwise it's the short form. We don't allow a
* length that's greater than what we can hold in an unsigned
* long.
*/
*len = netlen = 0;
if ( read_bytes( &sb, &lc, 1 ) != 1 ) {
goto premature_exit;
}
if ( lc & 0x80 ) {
int nbytes;
noctets = (lc & 0x7f);
if ( noctets > sizeof(ber_uint_t) ) {
#if !defined( macintosh ) && !defined( DOS )
errno = EMSGSIZE;
#endif
*Bytes_Scanned = 0;
return(LBER_OVERFLOW);
}
diff = sizeof(ber_uint_t) - noctets;
if ( (nbytes = read_bytes( &sb, (unsigned char *)&netlen + diff,
noctets )) != noctets ) {
/*
* The length is in long form and we don't get it in one
* fragment, so stash partial length in the ber element
* for later use
*/
ber->ber_tag_len_read = nbytes + 1;
ber->ber_len_contents[0]=lc;
memset(&(ber->ber_len_contents[1]), 0, sizeof(ber_uint_t));
SAFEMEMCPY(&(ber->ber_len_contents[1]), (unsigned char *)&netlen + diff, nbytes);
goto premature_exit;
}
*len = LBER_NTOHL( netlen );
} else {
*len = lc;
}
}
ber->ber_len = *len;
/* length fully decoded */
ber->ber_tag_len_read=0;
/*
* Finally, malloc a buffer for the contents and read it in.
* It's this buffer that's passed to all the other ber decoding
* routines.
*/
#if defined( DOS ) && !defined( _WIN32 )
if ( *len > 65535 ) { /* DOS can't allocate > 64K */
goto premature_exit;
}
#endif /* DOS && !_WIN32 */
if ( (sock != NULL) &&
( sock->sb_options & LBER_SOCKBUF_OPT_MAX_INCOMING_SIZE )
&& (*len > sock->sb_max_incoming) ) {
#if !defined( macintosh ) && !defined( DOS )
errno = EMSGSIZE;
#endif
*Bytes_Scanned = 0;
return( LBER_OVERFLOW );
}
if ( ber->ber_buf + *len > ber->ber_end ) {
if ( nslberi_ber_realloc( ber, *len ) != 0 )
goto error_exit;
}
ber->ber_ptr = ber->ber_buf;
ber->ber_end = ber->ber_buf + *len;
ber->ber_rwptr = ber->ber_buf;
}
toread = (ber_len_t)ber->ber_end - (ber_len_t)ber->ber_rwptr;
do {
if ( (rc = read_bytes( &sb, (unsigned char *)ber->ber_rwptr,
(ber_int_t)toread )) <= 0 ) {
goto premature_exit;
}
toread -= rc;
ber->ber_rwptr += rc;
} while ( toread > 0 );
*len = ber->ber_len;
*Bytes_Scanned = sb.offset;
return( ber->ber_tag );
premature_exit:
/*
* we're here because we hit the end of the buffer before seeing
* all of the PDU
*/
*Bytes_Scanned = sb.offset;
return(LBER_DEFAULT);
error_exit:
*Bytes_Scanned = 0;
return(LBER_DEFAULT);
}
/* The ber_flatten routine allocates a struct berval whose contents
* are a BER encoding taken from the ber argument. The bvPtr pointer
* points to the returned berval, which must be freed using
* ber_bvfree(). This routine returns 0 on success and -1 on error.
* The use of ber_flatten on a BerElement in which all '{' and '}'
* format modifiers have not been properly matched can result in a
* berval whose contents are not a valid BER encoding.
* Note that the ber_ptr is not modified.
*/
int
LDAP_CALL
ber_flatten( BerElement *ber, struct berval **bvPtr )
{
struct berval *new;
ber_len_t len;
/* allocate a struct berval */
if ( (new = (struct berval *)NSLBERI_MALLOC( sizeof(struct berval) ))
== NULL ) {
return( -1 );
}
/*
* Copy everything from the BerElement's ber_buf to ber_ptr
* into the berval structure.
*/
if ( ber == NULL ) {
new->bv_val = NULL;
new->bv_len = 0;
} else {
len = ber->ber_ptr - ber->ber_buf;
if ( ( new->bv_val = (char *)NSLBERI_MALLOC( len + 1 )) == NULL ) {
ber_bvfree( new );
return( -1 );
}
SAFEMEMCPY( new->bv_val, ber->ber_buf, (size_t)len );
new->bv_val[len] = '\0';
new->bv_len = len;
}
/* set bvPtr pointer to point to the returned berval */
*bvPtr = new;
return( 0 );
}
/*
* The ber_init function constructs and returns a new BerElement
* containing a copy of the data in the bv argument. ber_init
* returns the null pointer on error.
*/
BerElement *
LDAP_CALL
ber_init( const struct berval *bv )
{
BerElement *ber;
/* construct BerElement */
if (( ber = ber_alloc_t( 0 )) != NULLBER ) {
/* copy data from the bv argument into BerElement */
/* XXXmcs: had to cast unsigned long bv_len to long */
if ( (ber_write ( ber, bv->bv_val, bv->bv_len, 0 ))
!= (ber_slen_t)bv->bv_len ) {
ber_free( ber, 1 );
return( NULL );
}
}
/*
* reset ber_ptr back to the beginning of buffer so that this new
* and initialized ber element can be READ
*/
ber_reset( ber, 1);
/*
* return a ptr to a new BerElement containing a copy of the data
* in the bv argument or a null pointer on error
*/
return( ber );
}
/*
* memory allocation functions.
*/
void *
nslberi_malloc( size_t size )
{
return( nslberi_memalloc_fns.lbermem_malloc == NULL ?
malloc( size ) :
nslberi_memalloc_fns.lbermem_malloc( size ));
}
void *
nslberi_calloc( size_t nelem, size_t elsize )
{
return( nslberi_memalloc_fns.lbermem_calloc == NULL ?
calloc( nelem, elsize ) :
nslberi_memalloc_fns.lbermem_calloc( nelem, elsize ));
}
void *
nslberi_realloc( void *ptr, size_t size )
{
return( nslberi_memalloc_fns.lbermem_realloc == NULL ?
realloc( ptr, size ) :
nslberi_memalloc_fns.lbermem_realloc( ptr, size ));
}
void
nslberi_free( void *ptr )
{
if ( nslberi_memalloc_fns.lbermem_free == NULL ) {
free( ptr );
} else {
nslberi_memalloc_fns.lbermem_free( ptr );
}
}
/*
******************************************************************************
* functions to bridge the gap between new extended I/O functions that are
* installed using ber_sockbuf_set_option( ..., LBER_SOCKBUF_OPT_EXT_IO_FNS,
* ... ).
*
* the basic strategy is to use the new extended arg to hold a pointer to the
* Sockbuf itself so we can find the old functions and call them.
* note that the integer socket s passed in is not used. we use the sb_sd
* from the Sockbuf itself because it is the correct type.
*/
static int
nslberi_extread_compat( int s, void *buf, int len,
struct lextiof_socket_private *arg )
{
Sockbuf *sb = (Sockbuf *)arg;
return( sb->sb_io_fns.lbiof_read( sb->sb_sd, buf, len ));
}
static int
nslberi_extwrite_compat( int s, const void *buf, int len,
struct lextiof_socket_private *arg )
{
Sockbuf *sb = (Sockbuf *)arg;
return( sb->sb_io_fns.lbiof_write( sb->sb_sd, buf, len ));
}
/*
* Install I/O compatiblity functions. This can't fail.
*/
static void
nslberi_install_compat_io_fns( Sockbuf *sb )
{
sb->sb_ext_io_fns.lbextiofn_size = LBER_X_EXTIO_FNS_SIZE;
sb->sb_ext_io_fns.lbextiofn_read = nslberi_extread_compat;
sb->sb_ext_io_fns.lbextiofn_write = nslberi_extwrite_compat;
sb->sb_ext_io_fns.lbextiofn_writev = NULL;
sb->sb_ext_io_fns.lbextiofn_socket_arg = (void *)sb;
}
/*
* end of compat I/O functions
******************************************************************************
*/
Reference in a new issue View git blame Copy permalink