Bug 1322373 - TLS 1.3 early-data for http/2

netwerk/protocol/http/Http2Session.cpp

@@ -64,7 +64,7 @@ do {                             \
   return NS_ERROR_ILLEGAL_VALUE; \
   } while (0)
 
-Http2Session::Http2Session(nsISocketTransport *aSocketTransport, uint32_t version)
+Http2Session::Http2Session(nsISocketTransport *aSocketTransport, uint32_t version, bool attemptingEarlyData)
   : mSocketTransport(aSocketTransport)
   , mSegmentReader(nullptr)
   , mSegmentWriter(nullptr)
@@ -112,6 +112,7 @@ Http2Session::Http2Session(nsISocketTransport *aSocketTransport, uint32_t versio
   , mWaitingForSettingsAck(false)
   , mGoAwayOnPush(false)
   , mUseH2Deps(false)
+  , mAttemptingEarlyData(attemptingEarlyData)
 {
   MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread);
 
@@ -501,6 +502,12 @@ Http2Session::SetWriteCallbacks()
 void
 Http2Session::RealignOutputQueue()
 {
+  if (mAttemptingEarlyData) {
+    // We can't realign right now, because we may need what's in there if early
+    // data fails.
+    return;
+  }
+
   mOutputQueueUsed -= mOutputQueueSent;
   memmove(mOutputQueueBuffer.get(),
           mOutputQueueBuffer.get() + mOutputQueueSent,
@@ -518,6 +525,14 @@ Http2Session::FlushOutputQueue()
   uint32_t countRead;
   uint32_t avail = mOutputQueueUsed - mOutputQueueSent;
 
+  if (!avail && mAttemptingEarlyData) {
+    // This is kind of a hack, but there are cases where we'll have already
+    // written the data we want whlie doing early data, but we get called again
+    // with a reader, and we need to avoid calling the reader when there's
+    // nothing for it to read.
+    return;
+  }
+
   rv = mSegmentReader->
     OnReadSegment(mOutputQueueBuffer.get() + mOutputQueueSent, avail,
                   &countRead);
@@ -528,14 +543,18 @@ Http2Session::FlushOutputQueue()
   if (NS_FAILED(rv))
     return;
 
+  mOutputQueueSent += countRead;
+
+  if (mAttemptingEarlyData) {
+    return;
+  }
+
   if (countRead == avail) {
     mOutputQueueUsed = 0;
     mOutputQueueSent = 0;
     return;
   }
 
-  mOutputQueueSent += countRead;
-
   // If the output queue is close to filling up and we have sent out a good
   // chunk of data from the beginning then realign it.
 
@@ -554,6 +573,12 @@ Http2Session::DontReuse()
     Close(NS_OK);
 }
 
+uint32_t
+Http2Session::SpdyVersion()
+{
+  return HTTP_VERSION_2;
+}
+
 uint32_t
 Http2Session::GetWriteQueueSize()
 {
@@ -2328,7 +2353,36 @@ Http2Session::ReadSegmentsAgain(nsAHttpSegmentReader *reader,
       Unused << ResumeRecv();
     }
     SetWriteCallbacks();
-    return NS_BASE_STREAM_WOULD_BLOCK;
+    if (mAttemptingEarlyData) {
+      // We can still try to send our preamble as early-data
+      *countRead = mOutputQueueUsed - mOutputQueueSent;
+    }
+    return *countRead ? NS_OK : NS_BASE_STREAM_WOULD_BLOCK;
+  }
+
+  uint32_t earlyDataUsed = 0;
+  if (mAttemptingEarlyData) {
+    if (!stream->Do0RTT()) {
+      LOG3(("Http2Session %p will not get early data from Http2Stream %p 0x%X",
+            this, stream, stream->StreamID()));
+      FlushOutputQueue();
+      SetWriteCallbacks();
+      // We can still send our preamble
+      *countRead = mOutputQueueUsed - mOutputQueueSent;
+      return *countRead ? NS_OK : NS_BASE_STREAM_WOULD_BLOCK;
+    }
+
+    if (!m0RTTStreams.Contains(stream->StreamID())) {
+      m0RTTStreams.AppendElement(stream->StreamID());
+    }
+
+    // Need to adjust this to only take as much as we can fit in with the
+    // preamble/settings/priority stuff
+    count -= (mOutputQueueUsed - mOutputQueueSent);
+
+    // Keep track of this to add it into countRead later, as
+    // stream->ReadSegments will likely change the value of mOutputQueueUsed.
+    earlyDataUsed = mOutputQueueUsed - mOutputQueueSent;
   }
 
   LOG3(("Http2Session %p will write from Http2Stream %p 0x%X "
@@ -2337,6 +2391,13 @@ Http2Session::ReadSegmentsAgain(nsAHttpSegmentReader *reader,
 
   rv = stream->ReadSegments(this, count, countRead);
 
+  if (earlyDataUsed) {
+    // Do this here because countRead could get reset somewhere down the rabbit
+    // hole of stream->ReadSegments, and we want to make sure we return the
+    // proper value to our caller.
+    *countRead += earlyDataUsed;
+  }
+
   // Not every permutation of stream->ReadSegents produces data (and therefore
   // tries to flush the output queue) - SENDING_FIN_STREAM can be an example
   // of that. But we might still have old data buffered that would be good
@@ -2892,6 +2953,58 @@ Http2Session::WriteSegments(nsAHttpSegmentWriter *writer,
   return WriteSegmentsAgain(writer, count, countWritten, &again);
 }
 
+nsresult
+Http2Session::Finish0RTT(bool aRestart, bool aAlpnChanged)
+{
+  MOZ_ASSERT(mAttemptingEarlyData);
+  LOG3(("Http2Session::Finish0RTT %p aRestart=%d aAlpnChanged=%d", this,
+        aRestart, aAlpnChanged));
+
+  for (size_t i = 0; i < m0RTTStreams.Length(); ++i) {
+    // Instead of passing (aRestart, aAlpnChanged) here, we use aAlpnChanged for
+    // both arguments because as long as the alpn token stayed the same, we can
+    // just reuse what we have in our buffer to send instead of having to have
+    // the transaction rewind and read it all over again. We only need to rewind
+    // the transaction if we're switching to a new protocol, because our buffer
+    // won't get used in that case.
+    Http2Stream *stream = mStreamIDHash.Get(m0RTTStreams[i]);
+    if (stream) {
+      stream->Finish0RTT(aAlpnChanged, aAlpnChanged);
+    }
+  }
+
+  if (aRestart) {
+    // 0RTT failed
+    if (aAlpnChanged) {
+      // This is a slightly more involved case - we need to get all our streams/
+      // transactions back in the queue so they can restart as http/1
+
+      // These must be set this way to ensure we gracefully restart all streams
+      mGoAwayID = 0;
+      mCleanShutdown = true;
+
+      // Close takes care of the rest of our work for us. The reason code here
+      // doesn't matter, as we aren't actually going to send a GOAWAY frame, but
+      // we use NS_ERROR_NET_RESET as it's closest to the truth.
+      Close(NS_ERROR_NET_RESET);
+    } else {
+      // This is the easy case - early data failed, but we're speaking h2, so
+      // we just need to rewind to the beginning of the preamble and try again.
+      mOutputQueueSent = 0;
+    }
+  } else {
+    // 0RTT succeeded
+    // Make sure we look for any incoming data in repsonse to our early data.
+    ResumeRecv();
+  }
+
+  mAttemptingEarlyData = false;
+  m0RTTStreams.Clear();
+  RealignOutputQueue();
+
+  return NS_OK;
+}
+
 nsresult
 Http2Session::ProcessConnectedPush(Http2Stream *pushConnectedStream,
                                    nsAHttpSegmentWriter * writer,
@@ -3100,7 +3213,9 @@ Http2Session::Close(nsresult aReason)
   } else {
     goAwayReason = INTERNAL_ERROR;
   }
-  GenerateGoAway(goAwayReason);
+  if (!mAttemptingEarlyData) {
+    GenerateGoAway(goAwayReason);
+  }
   mConnection = nullptr;
   mSegmentReader = nullptr;
   mSegmentWriter = nullptr;
@@ -3150,7 +3265,7 @@ Http2Session::OnReadSegment(const char *buf,
 
   // If we can release old queued data then we can try and write the new
   // data directly to the network without using the output queue at all
-  if (mOutputQueueUsed)
+  if (mOutputQueueUsed && !mAttemptingEarlyData)
     FlushOutputQueue();
 
   if (!mOutputQueueUsed && mSegmentReader) {
@@ -3521,12 +3636,18 @@ Http2Session::ALPNCallback(nsISupports *securityInfo)
 nsresult
 Http2Session::ConfirmTLSProfile()
 {
-  if (mTLSProfileConfirmed)
+  if (mTLSProfileConfirmed) {
     return NS_OK;
+  }
 
   LOG3(("Http2Session::ConfirmTLSProfile %p mConnection=%p\n",
         this, mConnection.get()));
 
+  if (mAttemptingEarlyData) {
+    LOG3(("Http2Session::ConfirmTLSProfile %p temporarily passing due to early data\n", this));
+    return NS_OK;
+  }
+
   if (!gHttpHandler->EnforceHttp2TlsProfile()) {
     LOG3(("Http2Session::ConfirmTLSProfile %p passed due to configuration bypass\n", this));
     mTLSProfileConfirmed = true;