2018-01-19 03:59:58 +08:00
# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at http://mozilla.org/MPL/2.0/.
# LOCALIZATION NOTE These strings are used inside the Web Console
# command line which is available from the Web Developer sub-menu
# -> 'Web Console'.
# The correct localization of this file might be to keep it in
# English, or another language commonly spoken among web developers.
# You want to make that choice consistent across the developer tools.
# A good criteria is the language in which you'd find the best
# documentation on web development on the web.
# For each command there are in general two strings. As an example consider
# the 'pref' command.
# commandDesc (e.g. prefDesc for the command 'pref'): this string contains a
# very short description of the command. It's designed to be shown in a menu
# alongside the command name, which is why it should be as short as possible.
# commandManual (e.g. prefManual for the command 'pref'): this string will
# contain a fuller description of the command. It's diplayed when the user
# asks for help about a specific command (e.g. 'help pref').
# LOCALIZATION NOTE: This message is used to describe any command or command
# parameter when no description has been provided.
canonDescNone = (No description)
# LOCALIZATION NOTE: The default name for a group of parameters.
canonDefaultGroupName = Options
# LOCALIZATION NOTE (canonProxyDesc, canonProxyManual): These commands are
# used to execute commands on a remote system (using a proxy). Parameters: %S
# is the name of the remote system.
canonProxyDesc = Execute a command on %S
canonProxyManual = A set of commands that are executed on a remote system. The remote system is reached via %S
# LOCALIZATION NOTE: This error message is displayed when we try to add a new
# command (using a proxy) where one already exists with the same name.
canonProxyExists = There is already a command called ‘ ’
# LOCALIZATION NOTE: This message describes the '{' command, which allows
# entry of JavaScript like traditional developer tool command lines.
cliEvalJavascript = Enter JavaScript directly
# LOCALIZATION NOTE: This message is displayed when the command line has more
# arguments than the current command can understand.
cliUnusedArg = Too many arguments
# LOCALIZATION NOTE: The title of the dialog which displays the options that
# are available to the current command.
cliOptions = Available Options
# LOCALIZATION NOTE: The error message when the user types a command that
# isn't registered
cliUnknownCommand2 = Invalid Command: ‘ ’
# LOCALIZATION NOTE: A parameter should have a value, but doesn't
cliIncompleteParam = Value required for ‘ ’
# LOCALIZATION NOTE: Error message given when a file argument points to a file
# that does not exist, but should (e.g. for use with File->Open) %1$S is a
# filename
fileErrNotExists = ‘ ’ ’
# LOCALIZATION NOTE: Error message given when a file argument points to a file
# that exists, but should not (e.g. for use with File->Save As) %1$S is a
# filename
fileErrExists = ‘ ’
# LOCALIZATION NOTE: Error message given when a file argument points to a
# non-file, when a file is needed. %1$S is a filename
fileErrIsNotFile = ‘ ’
# LOCALIZATION NOTE: Error message given when a file argument points to a
# non-directory, when a directory is needed (e.g. for use with 'cd') %1$S is a
# filename
fileErrIsNotDirectory = ‘ ’
# LOCALIZATION NOTE: Error message given when a file argument does not match
# the specified regular expression %1$S is a filename %2$S is a regular
# expression
fileErrDoesntMatch = ‘ ’ ‘ ’
# LOCALIZATION NOTE: When the menu has displayed all the matches that it
# should (i.e. about 10 items) then we display this to alert the user that
# more matches are available.
fieldMenuMore = More matches, keep typing
# LOCALIZATION NOTE: The command line provides completion for JavaScript
# commands, however there are times when the scope of what we're completing
# against can't be used. This error message is displayed when this happens.
jstypeParseScope = Scope lost
# LOCALIZATION NOTE (jstypeParseMissing, jstypeBeginSyntax,
# jstypeBeginUnterm): These error messages are displayed when the command line
# is doing JavaScript completion and encounters errors.
jstypeParseMissing = Can’ ‘ ’
jstypeBeginSyntax = Syntax error
jstypeBeginUnterm = Unterminated string literal
# LOCALIZATION NOTE: This message is displayed if the system for providing
# JavaScript completions encounters and error it displays this.
jstypeParseError = Error
# LOCALIZATION NOTE (typesNumberNan, typesNumberNotInt2, typesDateNan): These
# error messages are displayed when the command line is passed a variable
# which has the wrong format and can't be converted. Parameters: %S is the
# passed variable.
typesNumberNan = Can’
typesNumberNotInt2 = Can’
typesDateNan = Can’
# LOCALIZATION NOTE (typesNumberMax, typesNumberMin, typesDateMax,
# typesDateMin): These error messages are displayed when the command line is
# passed a variable which has a value out of range (number or date).
# Parameters: %1$S is the passed variable, %2$S is the limit value.
typesNumberMax = %1$S is greater than maximum allowed: %2$S.
typesNumberMin = %1$S is smaller than minimum allowed: %2$S.
typesDateMax = %1$S is later than maximum allowed: %2$S.
typesDateMin = %1$S is earlier than minimum allowed: %2$S.
# LOCALIZATION NOTE: This error message is displayed when the command line is
# passed an option with a limited number of correct values, but the passed
# value is not one of them.
typesSelectionNomatch = Can’ ‘ ’
# LOCALIZATION NOTE: This error message is displayed when the command line is
# expecting a CSS query string, however the passed string is not valid.
nodeParseSyntax = Syntax error in CSS query
# LOCALIZATION NOTE (nodeParseMultiple, nodeParseNone): These error messages
# are displayed when the command line is expecting a CSS string that matches a
# single node, but more nodes (or none) match.
nodeParseMultiple = Too many matches (%S)
nodeParseNone = No matches
# LOCALIZATION NOTE (helpDesc, helpManual, helpSearchDesc, helpSearchManual3):
# These strings describe the "help" command, used to display a description of
# a command (e.g. "help pref"), and its parameter 'search'.
helpDesc = Get help on the available commands
helpManual = Provide help either on a specific command (if a search string is provided and an exact match is found) or on the available commands (if a search string is not provided, or if no exact match is found).
helpSearchDesc = Search string
helpSearchManual3 = search string to use in narrowing down the displayed commands. Regular expressions not supported.
2018-03-01 13:57:10 +01:00
# LOCALIZATION NOTE (helpManSynopsis, helpManDescription): These strings are
# displayed in the help page for a command in the console.
2018-01-19 03:59:58 +08:00
helpManSynopsis = Synopsis
2018-03-01 13:57:10 +01:00
helpManDescription = Description
2018-01-19 03:59:58 +08:00
# LOCALIZATION NOTE: This message is displayed in the help page if the command
# has no parameters.
helpManNone = None
# LOCALIZATION NOTE: This message is displayed in response to the 'help'
# command when used without a filter, just above the list of known commands.
helpListAll = Available Commands:
# LOCALIZATION NOTE (helpListPrefix, helpListNone): These messages are
# displayed in response to the 'help <search>' command (i.e. with a search
# string), just above the list of matching commands. Parameters: %S is the
# search string.
helpListPrefix = Commands starting with ‘ ’
helpListNone = No commands starting with ‘ ’
# LOCALIZATION NOTE (helpManRequired, helpManOptional, helpManDefault): When
# the 'help x' command wants to show the manual for the 'x' command, it needs
# to be able to describe the parameters as either required or optional, or if
# they have a default value.
helpManRequired = required
helpManOptional = optional
helpManDefault = optional, default=%S
# LOCALIZATION NOTE: This forms part of the output from the 'help' command.
# 'GCLI' is a project name and should be left untranslated.
helpIntro = GCLI is an experiment to create a highly usable command line for web developers.
# LOCALIZATION NOTE: Text shown as part of the output of the 'help' command
# when the command in question has sub-commands, before a list of the matching
# sub-commands.
subCommands = Sub-Commands
2018-03-01 13:57:10 +01:00
# LOCALIZATION NOTE: Text shown as part of the output of the 'help' command
# when the command in question should have sub-commands but in fact has none.
subCommandsNone = None
2018-01-19 03:59:58 +08:00
# LOCALIZATION NOTE: This error message is displayed when the command line is
# cannot find a match for the parse types.
commandParseError = Command line parsing error
# LOCALIZATION NOTE (contextDesc, contextManual, contextPrefixDesc): These
# strings are used to describe the 'context' command and its 'prefix'
# parameter. See localization comment for 'connect' for an explanation about
# 'prefix'.
contextDesc = Concentrate on a group of commands
contextManual = Setup a default prefix to future commands. For example ‘ ’ ‘ ’ ‘ ’
contextPrefixDesc = The command prefix
# LOCALIZATION NOTE: This message message displayed during the processing of
# the 'context' command, when the found command is not a parent command.
contextNotParentError = Can’ ‘ ’
# LOCALIZATION NOTE (contextReply, contextEmptyReply): These messages are
# displayed during the processing of the 'context' command, to indicate
# success or that there is no command prefix.
contextReply = Using %S as a command prefix
contextEmptyReply = Command prefix is unset
# LOCALIZATION NOTE (connectDesc, connectManual, connectPrefixDesc,
# connectMethodDesc, connectUrlDesc, connectDupReply): These strings describe
# the 'connect' command and all its available parameters. A 'prefix' is an
# alias for the remote server (think of it as a "connection name"), and it
# allows to identify a specific server when connected to multiple remote
# servers.
connectDesc = Proxy commands to server
connectManual = Connect to the server, creating local versions of the commands on the server. Remote commands initially have a prefix to distinguish them from local commands (but see the context command to get past this)
connectPrefixDesc = Parent prefix for imported commands
connectMethodDesc = The method of connecting
connectUrlDesc = The URL to connect to
connectDupReply = Connection called %S already exists.
# LOCALIZATION NOTE: The output of the 'connect' command, telling the user
# what it has done. Parameters: %S is the prefix command. See localization
# comment for 'connect' for an explanation about 'prefix'.
connectReply = Added %S commands.
# LOCALIZATION NOTE (disconnectDesc2, disconnectManual2,
# disconnectPrefixDesc): These strings describe the 'disconnect' command and
# all its available parameters. See localization comment for 'connect' for an
# explanation about 'prefix'.
disconnectDesc2 = Disconnect from server
disconnectManual2 = Disconnect from a server currently connected for remote commands execution
disconnectPrefixDesc = Parent prefix for imported commands
# LOCALIZATION NOTE: This is the output of the 'disconnect' command,
# explaining the user what has been done. Parameters: %S is the number of
# commands removed.
disconnectReply = Removed %S commands.
# LOCALIZATION NOTE (globalDesc, globalWindowDesc, globalOutput): These
# strings describe the 'global' command and its parameters
globalDesc = Change the JS global
globalWindowDesc = The new window/global
globalOutput = JS global is now %S
# LOCALIZATION NOTE: These strings describe the 'clear' command
clearDesc = Clear the output area
# LOCALIZATION NOTE (langDesc, langOutput): These strings describe the 'lang'
# command and its parameters
langDesc = Enter commands in different languages
langOutput = You are now using %S
# LOCALIZATION NOTE (prefDesc, prefManual, prefListDesc, prefListManual,
# prefListSearchDesc, prefListSearchManual, prefShowDesc, prefShowManual,
# prefShowSettingDesc, prefShowSettingManual): These strings describe the
# 'pref' command and all its available sub-commands and parameters.
prefDesc = Commands to control settings
prefManual = Commands to display and alter preferences both for GCLI and the surrounding environment
prefListDesc = Display available settings
prefListManual = Display a list of preferences, optionally filtered when using the ‘ ’
prefListSearchDesc = Filter the list of settings displayed
prefListSearchManual = Search for the given string in the list of available preferences
prefShowDesc = Display setting value
prefShowManual = Display the value of a given preference
prefShowSettingDesc = Setting to display
prefShowSettingManual = The name of the setting to display
# LOCALIZATION NOTE: This message is used to show the preference name and the
# associated preference value. Parameters: %1$S is the preference name, %2$S
# is the preference value.
prefShowSettingValue = %1$S: %2$S
# LOCALIZATION NOTE (prefSetDesc, prefSetManual, prefSetSettingDesc,
# prefSetSettingManual, prefSetValueDesc, prefSetValueManual): These strings
# describe the 'pref set' command and all its parameters.
prefSetDesc = Alter a setting
prefSetManual = Alter preferences defined by the environment
prefSetSettingDesc = Setting to alter
prefSetSettingManual = The name of the setting to alter.
prefSetValueDesc = New value for setting
prefSetValueManual = The new value for the specified setting
# LOCALIZATION NOTE (prefResetDesc, prefResetManual, prefResetSettingDesc,
# prefResetSettingManual): These strings describe the 'pref reset' command and
# all its parameters.
prefResetDesc = Reset a setting
prefResetManual = Reset the value of a setting to the system defaults
prefResetSettingDesc = Setting to reset
prefResetSettingManual = The name of the setting to reset to the system default value
# LOCALIZATION NOTE: This string is displayed in the output from the 'pref
# list' command as a label to an input element that allows the user to filter
# the results.
prefOutputFilter = Filter
# LOCALIZATION NOTE (prefOutputName, prefOutputValue): These strings are
# displayed in the output from the 'pref list' command as table headings.
prefOutputName = Name
prefOutputValue = Value
# LOCALIZATION NOTE (introDesc, introManual): These strings describe the
# 'intro' command. The localization of 'Got it!' should be the same used in
# introTextGo.
introDesc = Show the opening message
introManual = Redisplay the message that is shown to new users until they click the ‘ ’
# LOCALIZATION NOTE (introTextOpening3, introTextCommands, introTextKeys2,
# introTextF1Escape, introTextGo): These strings are displayed when the user
# first opens the developer toolbar to explain the command line, and is shown
# each time it is opened until the user clicks the 'Got it!' button.
introTextOpening3 = GCLI is an experiment to create a highly usable command line for web developers.
introTextCommands = For a list of commands type
introTextKeys2 = , or to show/hide command hints press
introTextF1Escape = F1/Escape
introTextGo = Got it!
# LOCALIZATION NOTE: This is a short description of the 'hideIntro' setting.
hideIntroDesc = Show the initial welcome message
# LOCALIZATION NOTE: This is a description of the 'eagerHelper' setting. It's
# displayed when the user asks for help on the settings. eagerHelper allows
# users to select between showing no tooltips, permanent tooltips, and only
# important tooltips.
eagerHelperDesc = How eager are the tooltips
