# bajia initramfs.rc - first-stage init config for a classic two-stage boot.
#
# adjust the root device path below to match your hardware/rootfs setup.

on early-init
    mount proc /proc proc
    mount sysfs /sys sysfs
    mount devtmpfs /dev devtmpfs

on init
    # mount the real root filesystem (reuse `mount SOURCE TARGET FSTYPE`).
    # typical alternatives: `mount /dev/mmcblk0p2 /mnt/root ext4`,
    # an NFS root, or cryptsetup/LVM set up by earlier `exec` commands.
    mkdir /mnt/root 0755
    mount /dev/sda1 /mnt/root ext4

# the last trigger: pivot onto the real root and exec the real init.
on boot
    switch_root /mnt/root /sbin/init /etc/bajia/init.rc